Mock Croc, Scallop, or Shell-in-the-Yarn

Shell motifs is to crocheters as seed stitches are to knitters: a basic pattern of stitches that creates a small, textured motif in the finished work. They take little advanced knowledge and make the work go quickly. One of the most popular shell motifs today is the overlapping detached shell, also known as the crocodile stitch.


A similarly-scaled effect can be created in either knit or crochet by varying the number of threads we pick up each time we wrap the yarn over the hook or needle. The difference between this and ruching is that with the scallop stitch, we pick up all of the threads from the working edge through the indicated thread for the current wrap, rather than picking up only the thread of the current wrap. As I noted in a previous post, this will create a variable thickness in the working row; crocheters may need to use a larger hook to get the bulk of multiple working threads through the previous work. Conversely, knitters may need to use a smaller needle to manage working the multiple threads.

Single chain, Shell-in-Yarn, Starbella Flash

The basic method of working scallops is to pick up one additional thread on each stitch (or yarn-over) through the embellished edge, then one fewer thread on each stitch (or yarn-over) until only the working edge remains, and repeat.This works fine in a double or treble crochet and a wide mesh, in which the repeat may only take two or three stitches; it's a bit less obvious in knitting, where the repeat could take as many as twenty stitches.

Six rows knit scallop, Starbella Flash

One method of shortening this is to work with multiples of two, three, or more threads on each stitch.

I brought the pattern forward on the sample at right by working 1, 4, 7. all, 7, 4, 1 threads on an every third row pattern over 20 stitches. I brought all the scallops to the front of the work, and straight ruffles to the back, as follows: R1, 2: knit --start pattern-- R3: knit scallop row R4: knit R5: purl R6: purl scallop row R7: purl R8: knit --end pattern-- The scallops aren't precisely counterposed on this sample — I should have worked over 21 stitches to do perfect three-and-a-half pattern repeats: (1, 4, 7, all, 7, 4 for a six-stitch pattern) A deeper scallop might be achieved by skipping one or more spaces between each yarn-over.

6-row scallop stitch pattern

In crochet, scallops can be sent to one side of the work using the ball front/ball back technique discussed in a previous post.

Front and Back of Work

It's easy to tell the inside from the outside of most knitted or crocheted garment pieces by the pattern of stitches: three-dimensional work such as cables and popcorn stitches are only apparent on one side of the finished work.

Up to this  point in this blog, I've only treated stitches that look the same on both sides of the cloth, with one exception: crocheting in the round.

When you crochet or knit [note: knit, not knit and purl] in the round, the bulk of the ruffle yarn remains on one side of the work, creating a tight ruffled texture on one side and the traditional appearance of knitting or crocheting on the other. When you work flat, the yarn  stays on the same side of the hook or needles, but each time you turn the work, you alternate working from the front and the back of the garment. This causes the ruffle to appear on both sides of the work, making it difficult to use for many garments other than The Scarf.

Knitting has a basic stitch that is different from the front and back of the work: stocking (stockinette) stitch. Alternating rows of knit and purl, the structure of the knit is seen on one side of the work, while a more condensed version of the garter stitch appears on the other side. With ruffle yarns, this usually-reverse side will contain all the fabric of the ribbon or mesh, while the knit side will appear as a loosely-worked traditional knit. Viewed from this side, the technique is called reverse stockinette stitch.

Crochet is another matter. In order to get a distinctive front and back of the work, we need to make sure that we are always feeding the yarn from what will become the outside of the finished fabric. Because this means switching the ball of yarn from in back of the work (when the ruffling is facing away from you) to the front of the work (between you and the hook, when the ruffling is facing towards you), I'm referring to it as "Ball Front/Ball Back". The following video describes the technique. 

Mesh Yarns, Hairpin Lace, and Heirloom Sewing

Hairpin lace on the loom

Hairpin lace loops bound singly or in groups (top side)

Hairpin lace is a crochet technique in which long strips of fabric are created with long, even, loops on both sides of a central pair of stitches. Typically, the loops are crocheted together singly or in bunches, after which the strip is crocheted to other similar strips to create a full garment, though there are patterns in which the loops on adjacent strips are chained into each other (interwoven), or in which the crochet stitches are stabilized and the loops left free.
 


Heirloom sewing is a collection of techniques used to add lace and embroidery to special-occasion garments, often with Edwardian- or Armistice-Era design elements. Among these techniques are lace insertion, in which a strip of lace with unembellished edges is inserted into the body of a garment piece (see images here), and the underlying fabric cut away to create an element of airiness, and puffing strips, in which a long strip of fabric is gathered on both long sides, attached to lace insertion on both sides, and then inserted into a garment to create a dimensional effect (images). Several lace insertions, with or without puffing strips, may be sewn one to the other to create a broader trim known as a fancy band.

Hairpin lace, heirloom lace insertions, puffing strips, and fancy bands are similar in that they are narrow strips of material that can be combined to create a wider material which can be used either to create a garment or as decorative elements within a garment. Hairpin techniques used to edge and join Sashay Lengths of mesh yarn can be used in place of strips of hairpin lace, or in the design space of lace insertions or puffing strips, to create similar effects in knitted and crocheted garments. One pattern that uses mesh yarn in place of hairpin lace is Red Heart Yarn's Wrap and Go Shawl.

Splicing together two strips of Starbella

To splice together two strips of mesh lace Match your thread size to the threads used to make the mesh yarn (Starbella takes size 20 or 30 crochet cotton) Count the number of stitches between a thread's connections to its adjacent thread (A), and the number of stitches in which it is connected to that adjacent thread (B). For the sample of Starbella above, A = stitches and B = 2 stitches along Thread 1. Choose a steel hook size to create same number of chains/stitches per inch with crochet cotton. (In the example to the right, I used a number 12 hook and size 30 crochet cotton. I should have probably used a number 9 hook.) Chain 1/2 A, then connect to Strip 1 with B stitches. Chain 1/2 A, then connect to Strip 2 with B stitches. Repeat until you run out of length on the two strips. Detail

Interweaving two strips of Sashay To interweave two strips of yarn together Detail Pull Thread 1 of the first strip through Thread 1 of the second strip.  Insert the hook (or needle) through the next open space on Thread 1 of the second strip; pull through the loop on the hook (or needle). Insert the hook (or needle) through the next open space on Thread 1 of the first strip, pull through the loop on the hook (or needle) Repeat as long as necessary to create the required length of ruffle yarn.

Ruching

Ruching is a pleating or ruffling technique of taking equal, measured stitches diagonally across a narrow piece of trim in a zig-zag pattern and gathering the fabric along the seam line, straightening out the seam. The result is equally-sized puffs of fabric on both sides of a central seam, each side offset from the other by half the length of the zig-zag.

The orange yarn marks the ruching path	The blueish yarn marks the ruching path
The gathering (ruching) thread has been drawn straight.	Starbella Flash drawn up on ruching thread

Another method is to slip stitch along the ruching lines. This creates an equally measured path along which the yarn can be easily folded, creating two overlapping rows of petals.

Top: Starbella Flash trimmed in Lily Daisy #30 crochet cotton
Bottojm: Trendsetter Flamenco trimmed in Velnette

When wrapped spirally, ruched ruffle yarn makes a distinctive ruched rose.

Technique: Mitered Cast On and Bind Off

One method of hiding the raw edges on ruffle yarn is to work them into the bind on and cast off of a piece.

Casting On

Fold the raw edge diagonally so that the first row of alternate spaces meets the loops formed by Threads 1 and 2.
	Match the loops to the alternate spaces. You may need to pin the openings to a padded board to keep them aligned.
Cast on or chain as usual, keeping the matched openings together.

Finishing Off

As you approach the end of your piece, count out the number of loops you need to bind off and/or finish the final row or round. You should do this when you require one or two loops more than the number of alternate rows on your yarn.

Cut the yarn with two or three loops more than you need to finish your work.

Fold the raw edge diagonally so that the first row of alternate spaces meets the loops formed by Threads 1 and 2. Be sure to make your fold so that the raw edge will end up on the inside of the work, rather than the outside (as I did in following photos).
You may need to transfer the matched loops to a cable needle or other holding needle to keep them in order as you finish the final row.

A third needle keeps the loops-to-be-worked straight

Continue to crochet, or to bind off, as usual. Finish and secure the threads and open loops at the working edge.

A mitered bind-off

Note that if I had folded the raw edge to the other side of the working edge, the raw edges at the top would have been hidden.

Counting Stitches: Alternate Spaces

Some patterns and techniques will require you to make use only of spaces in a pattern that is perpendicular to a particular loop -- say, to create a mitered corner or a traditional (bent at 45-degree angles) ribbon rose.
Depending upon whether your spaces are to start, you would use either the spaces defined by the capital letters below, or the spaces defined by the lower-case letters.



Or, in the theme we discussed earlier, usually the odd-numbered spaces, but occasionally the even-numbered ones.

Basic Stitches: Double Crochet

Double Crochet

Double crochet is, in my opinion, the quickest and most effective fabric, or filling, stitch in crochet. It works up more rapidly than single crochet, without the long bars and open spaces of treble crochet, double treble, or bullion stitch.

In ruffle yarns, the longer stitch of double crochet presents a deeper ruffle than single crochet. On the flip side, the longer stitch means a longer length of unruffled "back side" between rows on The Scarf, while reducing the "z-direction" — the thickness of the scarf. It makes for a thinner, more flexible scarf, and in a ribbon yarn, can bring to mind the curls of natural fleece or the evenly-spaced curves of an Elizabethan ruff.

Insert hook through next open loop of yarn.
	Insert hook through next open chain or stitch; wrap next open loop of yarn around hook. Use hook to draw the last thread through the chain or stitch.
Wrap next open loop of yarn around hook. Draw thread through the loop and yarn-over on the hook.
Yarn over once again, and draw through both loops on hook.
Row of Double Crochet (Flamenco by Trendsetter)	Row of Double Crochet (Twist & Twirl by Bernat)
After a few rows of stitches:
Flamenco (Trendsetter) Twist & Twirl (Bernat)	Top to bottom: Flaunt (Loops & Threads) Sashay (Red Heart Boutique) Starbella (Premier Yarns)

Basic Stitches: Single Crochet

Single Crochet

Single crochet creates a dense, thick, shallow ruffle.

Flamenco by Trendsetter Yarns	Insert your hook through the chain top of the previous row or round, or the top of your foundation chain.
Slip the next free loop of the yarn's working edge over the hook.
Draw the thread through the previous-row loop.
	Slip the next free loop of the yarn's working edge over the hook.
Draw the thread through both loops on the hook.

After the first row:
After several rows:
The other side of the work:

Examples

Top to bottom: examples of single crochet in Flaunt (Loops & Threads), Sashay (Red Heart Boutique), and Starbella (Premier Yarns). Note the short yarn height, shallow ruffles, and dense texture.